Nav for Truck Open app

Nav for Truck · Guide

Oversize Load GPS: What It Is and How Permit-Reading Navigation Works

Dispatchers and drivers searching for "GPS app for oversize load" usually find general truck GPS apps — not navigation that follows an actual state permit. Here is the difference, in plain terms.

What is an oversize load GPS app?

An oversize load GPS app is truck navigation built for loads that need a state oversize/overweight (OS/OW) permit. It accounts for the truck's height, width, weight and length, and keeps the driver on roads that can legally carry that specific load — instead of routing the way a car GPS or a general truck GPS does.

Why doesn't a regular truck GPS work for an oversize load?

A regular truck GPS app — Trucker Path, CoPilot, Hammer, SmartTruckRoute and similar apps — routes by a truck profile you enter once: height and weight class. An oversize/overweight permit is different. The state writes an exact route for that one move, road by road, often with its own curfews, escort requirements and bridge limits that apply only to that load. None of the general truck GPS apps reads that permit. Today, most drivers retype the permit's route into a consumer GPS by hand, or follow it from a printout — a wrong exit means a fine, a stopped load, or a low bridge.

How does Nav for Truck read the permit?

Upload the state permit as a photo or PDF, or get it from dispatch. Nav for Truck reads the route as the permit is written and gives turn-by-turn voice guidance on those roads, sized for the truck and the load. On a multi-state trip, the permits are joined at the state lines in the right order, so the driver follows one continuous route instead of switching permits by hand at the border.

What happens if the driver goes off the permitted route?

The app brings the driver back to the permitted route, not to a shortcut. Staying on the permit matters more than the fastest path — that's the whole point of a permit-reading GPS.

Is an oversize load GPS app only about height and weight?

No. Along the permitted route, Nav for Truck also shows weigh stations and CAT scales, truck stops with parking counts, rest areas and fuel, plus weather alerts, live traffic, work zones, tolls and state lines — the things a driver on a long permitted haul actually needs on the way.

Which states and permits does it cover?

Single-trip oversize, overweight, wide load, over-height, over-length, superload and heavy-haul permits from all 50 states, including multi-state trips with one permit per state.

Is it available for iPhone and Android?

Nav for Truck is on the App Store for iPhone and on Google Play for Android.

Can a dispatcher send the route instead of the driver uploading the permit?

Yes. Permit services and fleets using PermitRouting can read the permit, check the route for low bridges and weight limits, and send it to the driver's Nav for Truck app in one click — the driver doesn't need to upload anything.

FAQ

Does Nav for Truck replace the permit?

No. Nav for Truck is not a government app and does not issue permits. The state permit stays the legal document; the app follows it.

Does it work for a single state or multi-state trips?

Both. Single-state and multi-state trips are supported; on multi-state trips the permits are joined at the state lines in the right order.

Where does the road and bridge data come from?

See Government data sources for the full list of federal and state sources used in the app.

Related: Is there an app that reads your oversize permit and builds the route automatically?